(WINNING) MD-80 HOT-JET
Type MD-80 is a new style Hot-Jet Welding Machine as the standard model and with improvement of low noise by inventing Diaphragm Blower.
The blower capacity of this type is smaller than MD-120 but it is efficiently and logically designed to permit efficient welding, and thus it is used as the most popular welding machine.
It is beneficial as an economical type.
FEATURES
-
LOW NOISE OWING TO DIAPHRAGM BLOWER
-
CLEAN AIR CAN ALWAYS BE SUPPLIED AS ROTOR VANE IS NOT USED
-
AUTO STOP FUNCTION TO AVOID THE DAMAGE ON THE BLOWER
-
WIDE VARIATION OF USAGE, SUCH AS WELDING THERMAL PLASTIC, DRYING LIMITED PART, SHRINKING SMALL DIAMETER TUBE, AND FOR THE MACHINE OF PP. ROPE
-
SIMPLE OPERATION OF WELDING WITH THE SAME WAY AS THE PREVIOUS MODEL
-
LESS DAMAGE ON THE BLOWER BY SIMPLIFYING EACH PART
| REFERENCE TEMPERATURE AT CERTAIN SCALES |
| Normal Tempature |
20°C |
| Nozzle Tip |
7mm |
| Measurement of Surface |
3-90°C, 5-160°C, 7-250°C |
| Temperatures |
9-310°C, 11-400°C |
| Source of Power |
(voltage) |
100/200/220 |
| Frequency |
(Hz.) |
50/60 |
| Max. Output |
(Watt) |
800 |
| Range of Temperature |
(°C) |
0~400 |
| Wind Volume |
(liter/min) |
80 |
| Wind Pressure |
(kg/cm²) |
0.2~0.3 |
| Weight |
(kg) |
12 |
